Download Xiaomi 13 Ultra EDL Loader (prog_firehose_ddr) – Unbrick Tool

Stuck in Qualcomm HS-USB QDLoader 9008? Get the tested prog_firehose_ddr_ishtar.elf file. Essential for repairing dead boot, fixing partition corruption, and flashing raw firmware on the Xiaomi 13 Ultra.

The Xiaomi 13 Ultra (Codename: ishtar) is a premium photography-focused flagship powered by the robust Qualcomm Snapdragon 8 Gen 2 (SM8550). However, incorrect flashing, system updates, or software corruption can lead to a “Hard Brick,” where the device is only detected as Qualcomm HS-USB QDLoader 9008. To revive it, you need the specific Firehose Loader (Programmer) file tailored for the SM8550 platform.

File Information & Specs

Supported Tools

Due to the advanced security of the Snapdragon 8 Gen 2, standard free tools may not fully support this loader. It is recommended to use updated professional service tools:

• UnlockTool (Recommended)
• Chimera Tool
• UMT (Ultimate Multi Tool) – QcFire
• Hydra Tool
• Miflash Pro (Requires Xiaomi Auth Account)

How to Use Firehose Loader

1. Install Drivers: Ensure the latest Qualcomm HS-USB QDLoader 9008 driver is installed on your PC.
2. Open Flashing Tool: Launch your preferred professional tool (e.g., UnlockTool).
3. Select Model: Search for “Xiaomi 13 Ultra” or “ishtar”.
4. Load Custom Loader: If the tool does not auto-detect the loader, manually select the prog_firehose_ddr_ishtar.elf file in the “Custom Programmer” field.
5. Connect Device: Boot your Xiaomi 13 Ultra into EDL Mode (Test Point usage is typically required) and connect it to the PC.
6. Execute Repair: Click Flash or Factory Reset to begin the unbricking process.

⚠️ DISCLAIMER: Advanced Chipset Warning
The Xiaomi 13 Ultra uses the Snapdragon 8 Gen 2 (SM8550), which has strict security protections. Using an incorrect or old Firehose file can permanently destroy the UFS storage. Ensure you are using the specific loader for ishtar. If you do not have a professional tool or Auth account, proceed with extreme caution.