Redmi Note 14 Pro+ (amethyst) Qualcomm SM7635 Loader File – No Auth

Free download for the Redmi Note 14 Pro+ EDL Loader. This original Firehose file is compatible with QFIL, UnlockTool, and Chimera for communicating with the device’s storage.

The Redmi Note 14 Pro+ (Codename: amethyst) is a powerful mid-range device powered by the new Qualcomm Snapdragon 7s Gen 3 (SM7635). However, incorrect flashing, downgrading, or software corruption can lead to a “Hard Brick,” where the device is only detected as Qualcomm HS-USB QDLoader 9008. To revive it, you need the specific Firehose Loader (Programmer) file tailored for the SM7635 platform.

File Information & Specs

Supported Tools

Due to the new chipset architecture of the Snapdragon 7s Gen 3, standard free tools may not fully support this loader yet. It is recommended to use updated professional service tools:

• UnlockTool (Recommended)
• Chimera Tool
• UMT (Ultimate Multi Tool) – QcFire
• Hydra Tool
• Miflash Pro (Requires Xiaomi Auth Account)

How to Use Firehose Loader

1. Install Drivers: Ensure the latest Qualcomm HS-USB QDLoader 9008 driver is installed on your PC.
2. Open Flashing Tool: Launch your preferred professional tool (e.g., UnlockTool).
3. Select Model: Search for “Redmi Note 14 Pro+” or “amethyst”.
4. Load Custom Loader: If the tool does not auto-detect the loader, manually select the prog_firehose_ddr_amethyst.elf file in the “Custom Programmer” field.
5. Connect Device: Boot your Redmi Note 14 Pro+ into EDL Mode. (Note: This usually requires shorting Test Points on the motherboard).
6. Execute Repair: Click Flash or Factory Reset to begin the unbricking process.

⚠️ DISCLAIMER: New Chipset Warning
The Redmi Note 14 Pro+ uses the Snapdragon 7s Gen 3 (SM7635), which has strict security protections. Using an incorrect or old Firehose file can permanently destroy the UFS storage. Ensure you are using the specific loader for amethyst. If you do not have a professional tool or Auth account, proceed with extreme caution.