Redmi 8A (olivelite) Global ROM Flash File (No Bootloader Unlock)

Download the 2.8 GB Global ROM for Redmi 8A (olivelite) and flash it without unlocking the bootloader. This guide details the “No Auth” EDL mode process.

Redmi 8A (olivelite) Flash File Details

This special firmware package is designed to be flashed in EDL (Emergency Download) mode, which bypasses the locked bootloader. Here are the technical details for the file and device.

Flash Global ROM on Redmi 8A (olivelite) Without Bootloader Unlock

Do you have a Redmi 8A (olivelite) stuck on a Chinese ROM and want to install the Global ROM with Google Play Services? The biggest challenge is often a locked bootloader. This guide is for advanced users and technicians, detailing how to flash the Global ROM on a locked Redmi 8A using the “No Bootloader Unlock” method.

⚠️ Disclaimer: This is an Advanced, High-Risk Process

This is an unofficial flashing method that bypasses Xiaomi’s standard security. It is intended for experienced users only. If you perform a step incorrectly or use the wrong file, you could permanently brick your device. Proceed with caution and at your own risk.

Required Tools & Drivers

You cannot flash this file with a simple USB cable. You must have specialized tools and the correct drivers. Ensure you have the following before you start.

• Redmi 8A (olivelite) Global ROM: The 2.8GB .rar file specified above.
• Auth Bypass Tool: This is essential. The Snapdragon 439 chipset requires an authorization bypass. You must use a professional tool, such as:
  • UMT Pro (Ultimate Multi Tool)
  • DFT Pro (Dongle Phor Tool)
  • UnlockTool or other similar software that supports the Redmi 8A (olivelite).
• Mi Flash Tool: The official Xiaomi flashing software.
• PC & USB Cable: A Windows PC and a reliable Micro USB cable.
• Qualcomm Drivers: Your PC must have the Qualcomm QDLoader 9008 drivers installed so it can detect the phone in EDL mode.

How to Flash (No Bootloader Unlock Method)

This process uses EDL Mode (Test Point) to force the flash.

1. Backup Your Data: This procedure will completely erase all data on the phone.
2. Install Drivers: Install the Qualcomm QDLoader 9008 drivers on your PC.
3. Enter EDL Mode (Test Point): Power off your Redmi 8A. You must open the back cover and locate the two “Test Points” on the motherboard. Using metal tweezers, short these two points together and, while holding them, connect the USB cable to the PC.
4. Check Device Manager: If done correctly, your PC’s Device Manager will show a new device under “Ports (COM & LPT)” as “Qualcomm HS-USB QDLoader 9008”.
5. Bypass Auth: Open your professional tool (UMT, DFT Pro, etc.). Navigate to the Xiaomi or Qualcomm section, select the “Redmi 8A (olivelite)” model, and perform the “Auth Bypass” or “Disable Auth” function.
6. Open Mi Flash Tool: Once auth is bypassed, run the Mi Flash Tool.
7. Load the ROM: Click “Select” and choose the folder where you extracted the 2.8GB Global ROM file.
8. Refresh and Flash: Click “Refresh” in Mi Flash Tool. Your “COM” port should appear. At the bottom of the tool, select Go “clean all”. Do NOT select “clean all and lock.”
9. Click the “Flash” button and wait. The process will take several minutes to complete.
10. Reboot: Once Mi Flash Tool shows “Success,” disconnect the phone and hold the power button to boot it up. The first boot on the new Global ROM will take longer than usual.

Conclusion

By following this advanced method, you have successfully converted your Redmi 8A (olivelite) to the Global ROM without needing to unlock the bootloader. Your phone will now have Google Play Services and multiple languages. This is only possible with professional tools like UMT or DFT Pro to handle the auth bypass.